Nederlands (Nederland)Formfutura StoneFil Granite 2.85mm 500g
Item No. 210000004600
Loading
StoneFil is a PLA-based filament which is based on the modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material densit
Price ā¬28.92
price per Piece
excl. tax
Available on backorder
Loading
This product cannot be ordered at the moment.
Description
StoneFil is a PLA-based filament which is based on the modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.
This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than ānormalā PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.Unique features
Compliance
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC REACH directive 1907/2006/EC
This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than ānormalā PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.
Unique features
- Easy to print
- 50% gravimetric powdered stone filling
- Ā±37% heavier than ānormalā PLA
- Matte and rough stone-like finish
General printing guidelines
| Nozzle size:Ā = 0.4mm | Layer height:Ā = 0.2mm | Flow rate:Ā Ā± 110% |
| Print temp:Ā Ā± 215 - 230Ā° C | Print speed:Ā Slow | Retraction:Ā Yes Ā± 5mm |
| Heat bed:Ā Ā± 0 - 60Ā° C | Fan speed:Ā 50-100% | Experience level:Ā Beginner |
Abrasiveness
StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.Filament length
| ?: 1.70 g/cc | 50 gr coil | 0.5 Kg spool | |||
| Ć 1.75mm | Ā± 12.2m | Ā± 122m | |||
| Ć 2.85mm | Ā± 4.6m | Ā± 46m |
Nozzle cleaning
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.
Product export information
| HS Code: 39169090 | Description:Ā Monofilament | Country of origin:Ā the Netherlands |
Compliance
This filament is compliant to below listed directives and regulations.Specifications
- Brand
- Formfutura
- GTIN
- 8718924478400
- Article no. manufacturer
- 285STONEFIL-GRAN-0500
Loading
Formfutura StoneFil Granite 2.85mm 500g
Item No. 210000004600
StoneFil is a PLA-based filament which is based on the modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material densit
Price ā¬28.92
price per Piece
excl. tax
Available on backorder
Loading
This product cannot be ordered at the moment.
Description
StoneFil is a PLA-based filament which is based on the modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone.
This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than ānormalā PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.Unique features
Compliance
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC REACH directive 1907/2006/EC
This high āstone fillingā has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than ānormalā PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish.
Unique features
- Easy to print
- 50% gravimetric powdered stone filling
- Ā±37% heavier than ānormalā PLA
- Matte and rough stone-like finish
General printing guidelines
| Nozzle size:Ā = 0.4mm | Layer height:Ā = 0.2mm | Flow rate:Ā Ā± 110% |
| Print temp:Ā Ā± 215 - 230Ā° C | Print speed:Ā Slow | Retraction:Ā Yes Ā± 5mm |
| Heat bed:Ā Ā± 0 - 60Ā° C | Fan speed:Ā 50-100% | Experience level:Ā Beginner |
Abrasiveness
StoneFil has a very high filling with stone powders and therefore the filament can have a slightly more abrasive effect on brass nozzles than unfilled filaments.Filament length
| ?: 1.70 g/cc | 50 gr coil | 0.5 Kg spool | |||
| Ć 1.75mm | Ā± 12.2m | Ā± 122m | |||
| Ć 2.85mm | Ā± 4.6m | Ā± 46m |
Nozzle cleaning
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.
Product export information
| HS Code: 39169090 | Description:Ā Monofilament | Country of origin:Ā the Netherlands |
Compliance
This filament is compliant to below listed directives and regulations.Specifications
- Brand
- Formfutura
- GTIN
- 8718924478400
- Article no. manufacturer
- 285STONEFIL-GRAN-0500