MeccatroniCore Resin Cleaning Agent 5L
Item nr. 210000004671
NON-HAZARDOUS CLEANING PRODUCT FOR DLP, LCD AND SLA PRINTS Method of use: Ultrasonic cleaning Manual or magnetic stirrer (preferred method) Manual by immersion in a container (glass or polyethylene) and shake by hand until the point where the excess resin dissolves In automatic washing systems (such
Voorgestelde retailprijs €96.8
Retailkorting 50%
Prijs €48.4
prijs per Stuk
incl. BTW
26 op voorraad
Aan het laden
Stuk
Omschrijving
NON-HAZARDOUS CLEANING PRODUCT FOR DLP, LCD AND SLA PRINTS
Method of use:
Method of use:
- Ultrasonic cleaning
- Manual or magnetic stirrer (preferred method)
- Manual by immersion in a container (glass or polyethylene) and shake by hand until the point where the excess resin dissolves
- In automatic washing systems (such as Form Wash, BB Cleaner, Elma etc.)
- Put the liquid in the container
- Move the container with the immersed piece for about 1 minute or activate the stirrer
- Leave the printed parts in the liquid for at least 5 minutes
- Remove the pieces and wash with hot water
- Blow the objects with compressed air
- Proceed with the UV curing of the printed objects
Specificaties
- Merk
- Meccatronicore
MeccatroniCore Resin Cleaning Agent 5L
Item nr. 210000004671
NON-HAZARDOUS CLEANING PRODUCT FOR DLP, LCD AND SLA PRINTS Method of use: Ultrasonic cleaning Manual or magnetic stirrer (preferred method) Manual by immersion in a container (glass or polyethylene) and shake by hand until the point where the excess resin dissolves In automatic washing systems (such
Voorgestelde retailprijs €96.8
Retailkorting 50%
Prijs €48.4
prijs per Stuk
incl. BTW
26 op voorraad
Aan het laden
Stuk
Omschrijving
NON-HAZARDOUS CLEANING PRODUCT FOR DLP, LCD AND SLA PRINTS
Method of use:
Method of use:
- Ultrasonic cleaning
- Manual or magnetic stirrer (preferred method)
- Manual by immersion in a container (glass or polyethylene) and shake by hand until the point where the excess resin dissolves
- In automatic washing systems (such as Form Wash, BB Cleaner, Elma etc.)
- Put the liquid in the container
- Move the container with the immersed piece for about 1 minute or activate the stirrer
- Leave the printed parts in the liquid for at least 5 minutes
- Remove the pieces and wash with hot water
- Blow the objects with compressed air
- Proceed with the UV curing of the printed objects
Specificaties
- Merk
- Meccatronicore