Raise3D Hyper Speed PLA White 1kg

Art nr.210000005011
Raise3D Hyper Speed PLA Filament Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from solid to a molten
Prijs €36
prijs per Piece
excl. BTW
4 op voorraad
Piece

Omschrijving

Raise3D Hyper Speed PLA Filament
Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers.

With optimized molecular weight and tuned flowability, Raise3D Hyper Speed PLA is capable of achieving faster melting in the hot end and much quicker cooling after the material has been extruded. As a result, the surface quality of parts printed by Hyper Speed filaments is smooth and most of the sharp details are kept. Most importantly, thanks to optimized molecular weight, Hyper Speed PLA shows excellent interlayer bonding quality and Z-direction strength. Therefore, Hyper speed PLA can be used for concept models and figures, prototyping, etc.

Please note that Hyper Speed to function correctly, the Hyper Speed Hot Ends, the Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.
Compatibility
It is compatible with the Raise3D Hyper Speed Upgrade Kit, Raise3D Pro3 and Raise3D Pro3 Plus.

Specificaties

Merk
Raise3D
GTIN
6970240728603
Article no. manufacturer
6970240728603
Filament diameter
1.75mm
Density
1,24 g/cc
Tensile strength
46,6 MPa
Tensile modulus
0 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m

Raise3D Hyper Speed PLA White 1kg

Art nr.210000005011
Raise3D Hyper Speed PLA Filament Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from solid to a molten
Prijs €36
prijs per Piece
excl. BTW
4 op voorraad
Piece

Omschrijving

Raise3D Hyper Speed PLA Filament
Hyper Speed PLA filament is one of the specially developed filaments from the High-speed filament line for FFF printing. When printing at high speeds, the filament is rapidly fed into the heat block, and the polymer has very little time to melt from solid to a molten state, which can cause nozzle clogging and poor bonding quality between layers.

With optimized molecular weight and tuned flowability, Raise3D Hyper Speed PLA is capable of achieving faster melting in the hot end and much quicker cooling after the material has been extruded. As a result, the surface quality of parts printed by Hyper Speed filaments is smooth and most of the sharp details are kept. Most importantly, thanks to optimized molecular weight, Hyper Speed PLA shows excellent interlayer bonding quality and Z-direction strength. Therefore, Hyper speed PLA can be used for concept models and figures, prototyping, etc.

Please note that Hyper Speed to function correctly, the Hyper Speed Hot Ends, the Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.
Compatibility
It is compatible with the Raise3D Hyper Speed Upgrade Kit, Raise3D Pro3 and Raise3D Pro3 Plus.

Specificaties

Merk
Raise3D
GTIN
6970240728603
Article no. manufacturer
6970240728603
Filament diameter
1.75mm
Density
1,24 g/cc
Tensile strength
46,6 MPa
Tensile modulus
0 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m