DSM Novamid® ID1030 Black 1.75mm 2kg

Art nr.210000004694
DSM Novamid® ID1030 material for Fused Filament Fabrication (FFF) can print parts with properties close to what is achievable through injection molding – at the same speed as unreinforced plastics. This open source filament material is a pure polyamide 6/polyamide 66, and was originally developed ma
Prijs €152.5
prijs per Piece
excl. BTW
Beschikbaar via nabestelling
Piece

Omschrijving

DSM Novamid® ID1030 material for Fused Filament Fabrication (FFF) can print parts with properties close to what is achievable through injection molding – at the same speed as unreinforced plastics. This open source filament material is a pure polyamide 6/polyamide 66, and was originally developed many years ago by our Engineering Plastics experts for demanding specialty applications often subjected to extreme heat.

Properties

  • Outstanding stiffness and ductility
  • Sustainable

Applications

  • Development of visual and functional prototypes
  • Spare parts
  • End-use parts
  • Transportation
  • Sports
  • Electronics

Compatibility


BASIC 3D PRINT SETTING

Extruder temp-
Bed temp-
Heated chamber temp-
Nozzle-
Bed adhesion-
Recommended drying-
Support material-

Specificaties

Merk
DSM
Filament diameter
1.75mm
Density
0 g/cc
Tensile strength
0 MPa
Tensile modulus
0 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m

DSM Novamid® ID1030 Black 1.75mm 2kg

Art nr.210000004694
DSM Novamid® ID1030 material for Fused Filament Fabrication (FFF) can print parts with properties close to what is achievable through injection molding – at the same speed as unreinforced plastics. This open source filament material is a pure polyamide 6/polyamide 66, and was originally developed ma
Prijs €152.5
prijs per Piece
excl. BTW
Beschikbaar via nabestelling
Piece

Omschrijving

DSM Novamid® ID1030 material for Fused Filament Fabrication (FFF) can print parts with properties close to what is achievable through injection molding – at the same speed as unreinforced plastics. This open source filament material is a pure polyamide 6/polyamide 66, and was originally developed many years ago by our Engineering Plastics experts for demanding specialty applications often subjected to extreme heat.

Properties

  • Outstanding stiffness and ductility
  • Sustainable

Applications

  • Development of visual and functional prototypes
  • Spare parts
  • End-use parts
  • Transportation
  • Sports
  • Electronics

Compatibility


BASIC 3D PRINT SETTING

Extruder temp-
Bed temp-
Heated chamber temp-
Nozzle-
Bed adhesion-
Recommended drying-
Support material-

Specificaties

Merk
DSM
Filament diameter
1.75mm
Density
0 g/cc
Tensile strength
0 MPa
Tensile modulus
0 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m