GET ACCESS TO THE WIDEST MATERIAL RANGE ON THE MARKET WITH ULTRA 3D PRINTER
miniFactory Ultra 3D Printer has advanced heated chamber up to 250C which unlocks the whole material range for your use. From commodity and engineering polymers all the way up to the most demanding high-performance polymers.
KIMYA PC-S
PC-S (Polycarbonate) is an amorphous transparent thermoplastic. It offers high resistance to heat. It is solid and is suitable for demanding applications. It is well suited to a variety of applications such as the production of parts in the food industry and engineering.Features:
- Temperature tolerance (from -100°C to +140°C)
- Sterilization capable
- Food contact certification EU10/2011, FDA 21 CFR
- Complies with the REACH and RoHS standards
- Excellent impact resistance
- Low hydrolysis sensitivity
PA CARBON
PA Carbon (polyamide) is ideal for high-performance and durable structural end-use parts, making 3D printing technology a viable option for demanding racing and engineering structural applications that require robust performance at elevated temperatures.Features:
- Heat resistance 150°C
- Excellent mechanical properties
- High dimensional stability
- Long-term resistant
- Strong and durable
- Supreme surface quality
Productset Carrousel
PVDF
PVDF (Polyvinylidene Fluoride) is a semi-crystalline fluoropolymer with excellent abrasion resistance and outstanding weatherability. PVDF exhibits an increased chemical resistance and compatibility among thermoplastic materials.Features:
- Heat resistance up to 150°C
- Good resistance to acids and solvents
- Extremely high electrochemical stability
- Great abrasion and wear resistance
- Outstanding resistance to sunlight/UV exposure
- Good piezoelectric and pyroelectric properties
PEEK CARBON
PEEK (Polyetheretherketone) is a semi-crystalline thermoplastic with excellent thermal, mechanical and chemical resistance properties. The carbon fiber improves the compressive strength, stiffness and load carrying capacity of PEEK.Features:
- Heat resistance up to 240°C
- High strength and toughness
- Great abrasion and wear resistance
- Excellent electrical insulation properties over a wide range of temperature and frequencies
- Low smoke and toxic gas emissions
- Low thermal expansion rate
ULTEM® AM1010F
ULTEM® AM1010F (Polyetherimide) filament is used in applications that require high heat resistance, high strength and modulus and broad chemical resistance. The best choice for the most demanding applications where very high mechanical strength in combination with high temperature is required.Features:
- Heat resistance up to 210°C
- Good chemical resistance to acids, alcohols, fuels, oils, and halogenated solvents
- Excellent electrical insulation properties over a wide range of temperature and frequencies
- Low thermal conductivity
- Inherent flame resistance (UL94 V-0)
- Resistant to hydrolysis when exposed to hot water and steam
ULTEM® AM9085F
ULTEM® AM9085F (Polyetherimide) filament is based on a polyetherimide blend for use in the aerospace market. It is ideal for the aerospace, marine and ground vehicles due to its high strength-to-weight ratio and its FST (flame, smoke, and toxicity) rating.Features:
- Heat resistance up to 170°C
- Certified for aircraft components.
- FST compliant with an OSU rating of 55/55
- Inherent flame resistance (UL94 V-0)
- Excellent Impact-resistant
- Good chemical resistance to automotive fluids, aqueous solutions and alcohols
Productset Carrousel
PEKK-A
PEKK-A (PolyEtherKetoneKetone) offers low outgassing, high mechanical properties and exceptional resistance to extreme environments, like those in aerospace and oil exploration.Features:
- Heat resistance up to 150°C
- Extremely low outgassing
- Excellent chemical & ESC resistance (Environmental stress cracking)
- Inherent flame resistance (UL94 V-0)
- Fire Protection of Railway Vehicles (EN45545-2)
- Low FST (Flame, Smoke, Toxicity)
Productset Carrousel
PPSU
PPSU (Polyphenylsulfone) is known for its excellent hydrolytic stability and good resistance to chemicals and heat. This makes it an excellent choice for under-hood automotive applications and medical devices requiring repeated steam sterilization.Features:
- Heat resistance up to 220°C
- Excellent chemical and thermal resistance
- Sterilization capable – including EtO gas, radiation, steam autoclaving, plasma etc.
- Inherent flame resistance (UL94 V-0)
- Excellent hydrolysis resistance
- High strength and toughness
Productset Carrousel
WHAT IS THE EFFECT OF HEATED CHAMBER?
ULTIMATE STRENGTH AND QUALITY
WITH 250°C HEATED CHAMBER
The optimum temperature for the heated chamber is Glass transition temperature (Tg) of the used polymer. The heated chamber is the most important feature when looking for the best result.Optimum chamber temperatures for some high-performance polymers:
- PPSU – 225°C ULTEM 1010 – 220°C
- ULTEM 9085 – 185°C
- PEKK-A – 160°C
WITH THE MINIFACTORY ULTRA 3D PRINTER
- GREAT layer adhesion HIGH mechanical strength
- LOW mechanical stress
- LOW warping / cracking
A COMPETING MANUFACTURER'S PRINTER
- POOR layer adhesion
- MEDIUM mechanical strength
- HIGH mechanical stress
- HIGH warping / cracking
GET ACCESS TO THE WIDEST MATERIAL RANGE ON THE MARKET WITH ULTRA 3D PRINTER
miniFactory Ultra 3D Printer has advanced heated chamber up to 250C which unlocks the whole material range for your use. From commodity and engineering polymers all the way up to the most demanding high-performance polymers.
KIMYA PC-S
PC-S (Polycarbonate) is an amorphous transparent thermoplastic. It offers high resistance to heat. It is solid and is suitable for demanding applications. It is well suited to a variety of applications such as the production of parts in the food industry and engineering.Features:
- Temperature tolerance (from -100°C to +140°C)
- Sterilization capable
- Food contact certification EU10/2011, FDA 21 CFR
- Complies with the REACH and RoHS standards
- Excellent impact resistance
- Low hydrolysis sensitivity
PA CARBON
PA Carbon (polyamide) is ideal for high-performance and durable structural end-use parts, making 3D printing technology a viable option for demanding racing and engineering structural applications that require robust performance at elevated temperatures.Features:
- Heat resistance 150°C
- Excellent mechanical properties
- High dimensional stability
- Long-term resistant
- Strong and durable
- Supreme surface quality
Productset Carrousel
PVDF
PVDF (Polyvinylidene Fluoride) is a semi-crystalline fluoropolymer with excellent abrasion resistance and outstanding weatherability. PVDF exhibits an increased chemical resistance and compatibility among thermoplastic materials.Features:
- Heat resistance up to 150°C
- Good resistance to acids and solvents
- Extremely high electrochemical stability
- Great abrasion and wear resistance
- Outstanding resistance to sunlight/UV exposure
- Good piezoelectric and pyroelectric properties
PEEK CARBON
PEEK (Polyetheretherketone) is a semi-crystalline thermoplastic with excellent thermal, mechanical and chemical resistance properties. The carbon fiber improves the compressive strength, stiffness and load carrying capacity of PEEK.Features:
- Heat resistance up to 240°C
- High strength and toughness
- Great abrasion and wear resistance
- Excellent electrical insulation properties over a wide range of temperature and frequencies
- Low smoke and toxic gas emissions
- Low thermal expansion rate
ULTEM® AM1010F
ULTEM® AM1010F (Polyetherimide) filament is used in applications that require high heat resistance, high strength and modulus and broad chemical resistance. The best choice for the most demanding applications where very high mechanical strength in combination with high temperature is required.Features:
- Heat resistance up to 210°C
- Good chemical resistance to acids, alcohols, fuels, oils, and halogenated solvents
- Excellent electrical insulation properties over a wide range of temperature and frequencies
- Low thermal conductivity
- Inherent flame resistance (UL94 V-0)
- Resistant to hydrolysis when exposed to hot water and steam
ULTEM® AM9085F
ULTEM® AM9085F (Polyetherimide) filament is based on a polyetherimide blend for use in the aerospace market. It is ideal for the aerospace, marine and ground vehicles due to its high strength-to-weight ratio and its FST (flame, smoke, and toxicity) rating.Features:
- Heat resistance up to 170°C
- Certified for aircraft components.
- FST compliant with an OSU rating of 55/55
- Inherent flame resistance (UL94 V-0)
- Excellent Impact-resistant
- Good chemical resistance to automotive fluids, aqueous solutions and alcohols
Productset Carrousel
PEKK-A
PEKK-A (PolyEtherKetoneKetone) offers low outgassing, high mechanical properties and exceptional resistance to extreme environments, like those in aerospace and oil exploration.Features:
- Heat resistance up to 150°C
- Extremely low outgassing
- Excellent chemical & ESC resistance (Environmental stress cracking)
- Inherent flame resistance (UL94 V-0)
- Fire Protection of Railway Vehicles (EN45545-2)
- Low FST (Flame, Smoke, Toxicity)
Productset Carrousel
PPSU
PPSU (Polyphenylsulfone) is known for its excellent hydrolytic stability and good resistance to chemicals and heat. This makes it an excellent choice for under-hood automotive applications and medical devices requiring repeated steam sterilization.Features:
- Heat resistance up to 220°C
- Excellent chemical and thermal resistance
- Sterilization capable – including EtO gas, radiation, steam autoclaving, plasma etc.
- Inherent flame resistance (UL94 V-0)
- Excellent hydrolysis resistance
- High strength and toughness
Productset Carrousel
WHAT IS THE EFFECT OF HEATED CHAMBER?
ULTIMATE STRENGTH AND QUALITY
WITH 250°C HEATED CHAMBER
The optimum temperature for the heated chamber is Glass transition temperature (Tg) of the used polymer. The heated chamber is the most important feature when looking for the best result.Optimum chamber temperatures for some high-performance polymers:
- PPSU – 225°C ULTEM 1010 – 220°C
- ULTEM 9085 – 185°C
- PEKK-A – 160°C
WITH THE MINIFACTORY ULTRA 3D PRINTER
- GREAT layer adhesion HIGH mechanical strength
- LOW mechanical stress
- LOW warping / cracking
A COMPETING MANUFACTURER'S PRINTER
- POOR layer adhesion
- MEDIUM mechanical strength
- HIGH mechanical stress
- HIGH warping / cracking