Ultimaker Maintenance kit Ultimaker 2 (Extended)+

Art nr.210000000845
Een onderhoudskit met vervanging van alle consumables. Inbegrepen: 1x Glass plate 1x Bowden tube 1x PT100 B sensor 1x Heater cartridge 1x Grease 1x Machine oil 1x Calibration card 2x Build plate clamp 2x Clamp clip 2x Tube coupling collet 1x Hot end isolator 4x Olsson nozzles (0.40, 0.25, 0.60 and 0
Prijs €189
prijs per Piece
excl. BTW
1 op voorraad
Piece

Omschrijving

Een onderhoudskit met vervanging van alle consumables.
Inbegrepen:
  • 1x Glass plate
  • 1x Bowden tube
  • 1x PT100 B sensor
  • 1x Heater cartridge
  • 1x Grease
  • 1x Machine oil
  • 1x Calibration card
  • 2x Build plate clamp
  • 2x Clamp clip
  • 2x Tube coupling collet
  • 1x Hot end isolator
  • 4x Olsson nozzles (0.40, 0.25, 0.60 and 0.80 mm)
  • 2x TFM isolator coupler
  • 1x Print head alignment aid
  • 1x Hot end cooling fan
  • 2x Print cooling fan


Specificaties

Merk
Ultimaker
GTIN
8718836374340
Article no. manufacturer
9518
Compatible with Ultimaker S5-R2
No
Compatible with Ultimaker S5-R1
No
Compatible with Ultimaker S3
No
Compatible with Ultimaker 2+ Connect
No
Compatible with Ultimaker 3
No
Compatible with Ultimaker 3 Ext
No
Compatible with Ultimaker 2+
Yes
Compatible with Ultimaker 2 Ext+
No
Compatible with Ultimaker 2
No
Compatible with Ultimaker 2 Ext
No
Compatible with Ultimaker 2Go
No
Compatible with Ultimaker UMO
No
Compatible with Ultimaker UMO+
No

Ultimaker Maintenance kit Ultimaker 2 (Extended)+

Art nr.210000000845
Een onderhoudskit met vervanging van alle consumables. Inbegrepen: 1x Glass plate 1x Bowden tube 1x PT100 B sensor 1x Heater cartridge 1x Grease 1x Machine oil 1x Calibration card 2x Build plate clamp 2x Clamp clip 2x Tube coupling collet 1x Hot end isolator 4x Olsson nozzles (0.40, 0.25, 0.60 and 0
Prijs €189
prijs per Piece
excl. BTW
1 op voorraad
Piece

Omschrijving

Een onderhoudskit met vervanging van alle consumables.
Inbegrepen:
  • 1x Glass plate
  • 1x Bowden tube
  • 1x PT100 B sensor
  • 1x Heater cartridge
  • 1x Grease
  • 1x Machine oil
  • 1x Calibration card
  • 2x Build plate clamp
  • 2x Clamp clip
  • 2x Tube coupling collet
  • 1x Hot end isolator
  • 4x Olsson nozzles (0.40, 0.25, 0.60 and 0.80 mm)
  • 2x TFM isolator coupler
  • 1x Print head alignment aid
  • 1x Hot end cooling fan
  • 2x Print cooling fan


Specificaties

Merk
Ultimaker
GTIN
8718836374340
Article no. manufacturer
9518
Compatible with Ultimaker S5-R2
No
Compatible with Ultimaker S5-R1
No
Compatible with Ultimaker S3
No
Compatible with Ultimaker 2+ Connect
No
Compatible with Ultimaker 3
No
Compatible with Ultimaker 3 Ext
No
Compatible with Ultimaker 2+
Yes
Compatible with Ultimaker 2 Ext+
No
Compatible with Ultimaker 2
No
Compatible with Ultimaker 2 Ext
No
Compatible with Ultimaker 2Go
No
Compatible with Ultimaker UMO
No
Compatible with Ultimaker UMO+
No