MakerPoint PC-ABS is an incredibly strong filament with an even higher impact resistance than regular ABS. This is a consequence of the addition of the proper amount of polycarbonate, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. This, combined with a highly stable printing process makes PC-ABS the perfect material for mechanical parts and tools, which should be light, strong and show minimal wear after prolonged use.
Features:
- Improved interlayer adhesion
- High impact resistance
- High surface gloss
- Stable printing process
Dimensions
|
|
|
| Size |
Tolerance |
Roundness |
| 1,75mm |
± 0,05mm |
≥ 95% |
| 2,85mm |
± 0,10mm |
≥ 95% |
| Colors |
|
|
| MakerPoint PC-ABS is available in a large selection of bright colors. Special colors are available upon request with a minimum order quantity of 20kg. |
3D-printing
|
|
|
| Description |
|
Typical value |
| Printing technology |
|
FFF |
| Printing temp. |
|
245-270°C |
| Heated bed temp. |
|
± 90-110°C |
| Cooling fan |
|
100% |
| Flow Rate |
|
100% |
Physical properties
|
| Description |
Test method |
Typical value |
| Specific gravity |
ASTM D792 |
1,05 g/cc |
| MFR 220˚C/10kg |
ASTM D1238 |
7,0 g/10 min |
| Tensile strength |
ASTM D638 |
46 Mpa |
| Strain at break |
ASTM D638 |
13% |
| Tensile modulus |
ASTM D638 |
2100 MPa |
| Impact Strength |
ISO 180/A |
40 KJ/m2 |
Thermal properties
|
| Description |
Test method |
Typical value |
| Melting temp. |
ISO 294 |
250°C ± 10°C |
| Vicat softening temp. |
ISO 306 |
± 108°C |
