Back to overview

Ultimaker Tough PLA Green 2.85mm 750g

Item No.210000002279
Ultimaker Tough PLA Green 2.85mm 750g
Ultimaker Tough PLA is a technical PLA (polylactic acid) material with a toughness similar to ABS . It is ideal for printing functional prototypes and tooling at larger sizes – without fear of delamination or warping. Our Tough PLA offers the same safe and easy use as regular PLA . Greater machinabi
price per Piece
excl. tax
8 in stock
Piece

Description

Ultimaker Tough PLA is a technical PLA (polylactic acid) material with a toughness similar to ABS. It is ideal for printing functional prototypes and tooling at larger sizes – without fear of delamination or warping. Our Tough PLA offers the same safe and easy use as regular PLA.
  • Greater machinability than PLA allows more post-processing techniques.
  • Similar strength and higher stiffness compared to ABS.
  • No delamination or warping for reliable printing of larger parts.
  • Compatible with PVA and Breakaway support materials for full geometric freedom.
Properties
  • Good flexural strength (78 MPa)
  • Good impact strength (Izod tested to 9 kJ/m²)
  • High hardness (79 Shore D)
  • Melting temperature (151 °C)
Applications
  • Functional prototyping
  • Tooling
  • Manufacturing aids
Compatibility
Ultimaker Tough PLA is officially supported by the Ultimaker S5- en Ultimaker 3 series of 3D printers. It is compatible for dual extrusion with the following materials:

Specifications

Brand
Ultimaker
GTIN
8718836377686
Article no. manufacturer
202303
Filament diameter
2.85mm
Density
1,22 g/cc
Tensile strength
37 MPa
Tensile modulus
2346,5 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m
Compatible with Ultimaker S5-R2
Yes
Compatible with Ultimaker S5-R1
Yes
Compatible with Ultimaker S3
Yes
Compatible with Ultimaker 2+ Connect
Yes
Compatible with Ultimaker 3
Yes
Compatible with Ultimaker 3 Ext
Yes
Compatible with Ultimaker 2+
Yes
Compatible with Ultimaker 2 Ext+
Yes
Compatible with Ultimaker 2
Yes
Compatible with Ultimaker 2 Ext
Yes
Compatible with Ultimaker 2Go
No
Compatible with Ultimaker UMO
No
Compatible with Ultimaker UMO+
No
Back to overview
Ultimaker Tough PLA Green 2.85mm 750g

Ultimaker Tough PLA Green 2.85mm 750g

Item No.210000002279
Ultimaker Tough PLA is a technical PLA (polylactic acid) material with a toughness similar to ABS . It is ideal for printing functional prototypes and tooling at larger sizes – without fear of delamination or warping. Our Tough PLA offers the same safe and easy use as regular PLA . Greater machinabi
price per Piece
excl. tax
8 in stock
Piece

Description

Ultimaker Tough PLA is a technical PLA (polylactic acid) material with a toughness similar to ABS. It is ideal for printing functional prototypes and tooling at larger sizes – without fear of delamination or warping. Our Tough PLA offers the same safe and easy use as regular PLA.
  • Greater machinability than PLA allows more post-processing techniques.
  • Similar strength and higher stiffness compared to ABS.
  • No delamination or warping for reliable printing of larger parts.
  • Compatible with PVA and Breakaway support materials for full geometric freedom.
Properties
  • Good flexural strength (78 MPa)
  • Good impact strength (Izod tested to 9 kJ/m²)
  • High hardness (79 Shore D)
  • Melting temperature (151 °C)
Applications
  • Functional prototyping
  • Tooling
  • Manufacturing aids
Compatibility
Ultimaker Tough PLA is officially supported by the Ultimaker S5- en Ultimaker 3 series of 3D printers. It is compatible for dual extrusion with the following materials:

Specifications

Brand
Ultimaker
GTIN
8718836377686
Article no. manufacturer
202303
Filament diameter
2.85mm
Density
1,22 g/cc
Tensile strength
37 MPa
Tensile modulus
2346,5 MPa
Elongation at break
0 %
Flexural strength
0 MPa
Flexural modules
0 MPa
Izod impact (notched)
0 J/m
Compatible with Ultimaker S5-R2
Yes
Compatible with Ultimaker S5-R1
Yes
Compatible with Ultimaker S3
Yes
Compatible with Ultimaker 2+ Connect
Yes
Compatible with Ultimaker 3
Yes
Compatible with Ultimaker 3 Ext
Yes
Compatible with Ultimaker 2+
Yes
Compatible with Ultimaker 2 Ext+
Yes
Compatible with Ultimaker 2
Yes
Compatible with Ultimaker 2 Ext
Yes
Compatible with Ultimaker 2Go
No
Compatible with Ultimaker UMO
No
Compatible with Ultimaker UMO+
No