MakerPoint Glitter PLA is a highly aesthetical filament that is tougher and less brittle than regular PLA. The sparkling flakes inside make the layer lines and imperfections of FFF less visible giving a more pleasant to look at result. Premium quality filaments make a difference!
MakerPoint Glitter PLA Filament Properties
- Sparkling flakes for aesthetic effect
- Tougher and less brittle compared to regular PLA
- Easy to print at low temperature
- Limited smell
- Low warping
- Concept/Aesthetic models
- Architectural models
- Manufacturing (tooling, jigs, fixtures)
- Medical visualization aids
CompatibilityMakerPoint Glitter PLA filament is perfectly suited for most FFF 3D printers. We've tested the filament on Ultimaker, Raise3D, BCN3D and Creality with perfect results.
Please be aware that PLA Glitter, Matt, Satin and PLA-HT must be printed at higher temperatures than regular PLA.
Basic 3D Print Setting
|Extruder temp||215±10 ˚C (Higher than regular PLA)|
|Bed temp||35-60 ˚C|
|Heated chamber temp||Not required|
|Nozzle requirements||No special requirements|
|Bed adhesion||Dimafix, Magigoo, BuildTak|
|Drying recommendation||Over time, PLA materials might build up some moisture. Spools that have been open for a longer time might benefit from drying.|
|Support material||PLA, PVA, BVOH, Breakaway|
MakerPoint filaments are premium quality filaments manufactured in the Netherlands.
- Article no. manufacturer
- Filament diameter
- 1,24 g/cc
- Tensile strength
- 70 MPa
- Tensile modulus
- 3120 MPa
- Elongation at break
- Flexural strength
- Izod impact (notched)