MakerPoint PLA Satin filament is a PLA based material developed for its silky and smooth shine. Slower printing and low temperature improve the silky effect so that when viewed from different angles it gives a unique glossy effect. Premium quality filaments make a difference!
MakerPoint PLA Filament Properties
- High light reflection
- Smooth and silky
- Excellent satin look
- Deep colours
- Concept/Aesthetic models (Art)
- Architectural models
- Manufacturing (tooling, jigs, fixtures)
- Medical visualization aids
- Casts and molds for metal or ceramic parts
- Educational projects
CompatibilityMakerPoint PLA filament is perfectly suited for most FFF 3D printers. We've tested the filament on Ultimaker, Raise3D, BCN3D and Creality with perfect results.
Beware that PLA Glitter, Matt , Satin, and PLA-HT must be printed at higher temperatures than regular PLA. Parameters can influence the Satin effect, it is recommended to fine-tune this for your printer.
Basic 3D Print Setting
|Extruder temp||225±10 ˚C (Higher than regular PLA)|
|Bed temp||50-60 ˚C|
|Heated chamber temp||Not required|
|Nozzle requirements||No special requirements|
|Bed adhesion||Dimafix, Magigoo, BuildTak|
|Drying recommendation||Over time, PLA materials might build up some moisture. Spools that have been open for a longer time might benefit from drying.|
|Support material||PLA, PVA, BVOH, Breakaway|
MakerPoint filaments are premium quality filaments manufactured in the Netherlands.
- Article no. manufacturer
- Filament diameter
- 1,24 g/cc
- Tensile strength
- 70 MPa
- Tensile modulus
- 3120 MPa
- Elongation at break
- Flexural strength
- Izod impact (notched)