Bambu Lab Support for ABS White (66100) 500g (with spool)
Description
Bambu Lab Support for ABS White is a breakaway support material specifically formulated to work alongside ABS as the primary filament in Bambu Lab AMS multi-material setups. It is designed to bond sufficiently to ABS during printing to provide structural support while remaining easy to snap away cleanly after printing, without needing solvents or extended soaking.
The material reduces support-to-model adhesion at the interface, leaving a cleaner surface on the ABS model than standard PVA or same-material supports would. It is best used with an enclosed Bambu Lab printer for consistent results. The white colour makes support structures visually distinct from typical black or coloured ABS primary prints.
Key features
- Breakaway support formulation specifically optimised for ABS primary filament compatibility.
- Easy manual removal after printing without solvents or water dissolution required.
- Cleaner support interface finish on ABS models than same-material supports.
- Designed for Bambu Lab AMS multi-material setups alongside ABS primary filament.
- White colour makes support structures visually distinct for easy identification.
- Enclosed printer recommended for consistent results with ABS-based materials.
Compatible with: All Bambu Lab printers with AMS (enclosed recommended)
In the box: 1 x spool Bambu Lab Support for ABS White
Specifications
- Brand
- Bambu Lab
- GTIN
- 6975337038078
- Article no. manufacturer
- S06-W0-1.75-500-SPL
- Filament diameter
- 1.75mm
- Compatible with Bambu Lab P1P
- Yes
- Compatible with Bambu Lab P1S
- Yes
- Compatible with Bambu Lab X1-Carbon
- Yes
- Compatible with Bambu Lab X1E
- Yes
- Compatible with Bambu Lab H2D
- Yes
- Compatible with Bambu Lab H2S
- Yes
- Compatible with Bambu Lab H2D Pro
- Yes
- Compatible with Bambu Lab H2C
- Yes
- Compatible with Bambu Lab P2S
- Yes
Bambu Lab Support for ABS White (66100) 500g (with spool)
Description
Bambu Lab Support for ABS White is a breakaway support material specifically formulated to work alongside ABS as the primary filament in Bambu Lab AMS multi-material setups. It is designed to bond sufficiently to ABS during printing to provide structural support while remaining easy to snap away cleanly after printing, without needing solvents or extended soaking.
The material reduces support-to-model adhesion at the interface, leaving a cleaner surface on the ABS model than standard PVA or same-material supports would. It is best used with an enclosed Bambu Lab printer for consistent results. The white colour makes support structures visually distinct from typical black or coloured ABS primary prints.
Key features
- Breakaway support formulation specifically optimised for ABS primary filament compatibility.
- Easy manual removal after printing without solvents or water dissolution required.
- Cleaner support interface finish on ABS models than same-material supports.
- Designed for Bambu Lab AMS multi-material setups alongside ABS primary filament.
- White colour makes support structures visually distinct for easy identification.
- Enclosed printer recommended for consistent results with ABS-based materials.
Compatible with: All Bambu Lab printers with AMS (enclosed recommended)
In the box: 1 x spool Bambu Lab Support for ABS White
Specifications
- Brand
- Bambu Lab
- GTIN
- 6975337038078
- Article no. manufacturer
- S06-W0-1.75-500-SPL
- Filament diameter
- 1.75mm
- Compatible with Bambu Lab P1P
- Yes
- Compatible with Bambu Lab P1S
- Yes
- Compatible with Bambu Lab X1-Carbon
- Yes
- Compatible with Bambu Lab X1E
- Yes
- Compatible with Bambu Lab H2D
- Yes
- Compatible with Bambu Lab H2S
- Yes
- Compatible with Bambu Lab H2D Pro
- Yes
- Compatible with Bambu Lab H2C
- Yes
- Compatible with Bambu Lab P2S
- Yes


Nederlands (Nederland)