Starting at € 72.499
BUILD BIG: 330 x 330 x 565mm build volume, with 30%+ packing density
LOW PART COST: Production-quality part for 50% less, all in half the space
PRODUCTIVITY: Same day large parts and 3x the throughput of competitors
RELIABLE: AI Powered Print Intelligence failure prevention
INTUITIVE: Install & operate in one hour, start a print in 5 minutes 
Book a demo
Contact Sales

Hardware Overview: Production at the Press of a Button

  • Build Big: Produce full-scale production-quality parts in a massive build volume or run production builds at over 30% packing density to manufacture thousands of end-use parts in days, not weeks.
    • 330 × 330 × 565 mm build volume.
  • Low Part Cost: Fuse X1 delivers up to 50% lower part cost than legacy powder bed fusion systems in less than half the floorspace. Fuse X1 is cost-competitive with injection molding for tens of thousands of parts.
  • Productive: With 30%+ packing density and a 61.5L build volume, the Fuse X1 fits more parts in a single build than competing industrial SLS and MJF systems, adding up to thousands more parts per week.  
    • 3x throughput vs. Industrial Competitors
  • Intuitive and Reliable: Fuse X1 fits through a standard door, doesn’t require facility retrofit, and installs and prints on day one. An intuitive touchscreen guides you, while the build unit enables 5-minute changeovers.

Technology

  • Adaptive Thermal Control enables unlimited packing freedom, and exceptional part quality by delivering, maintaining, and sintering powder at an incredibly stable temperature.
  • Print Intelligence uses AI-powered computer vision to isolate and prevent failures, maximizing uptime so you get great parts on time every time.


Workflow: Large Format SLS, Simplified

An end-to-end industrial workflow you can install and run in one hour. No dedicated operator required.

1. Prepare

Auto-pack, optimize, and organize in PreForm: Orient, hollow, or label models, estimate print times, and automatically pack parts for optimized density, reducing print time and limiting waste.  Import STL, OBJ, 3MF, or models directly from a wide range of CAD applications.

2. Print

Print large parts in hours, not days: Most large builds complete under 24 hours, with same-day large parts in 5 hours.  Print Intelligence detects and masks anomalies in real time to protect yield.

3. Swap

5-minute print changeovers with the Fuse X1 Build Unit:Roll one build unit out, roll the next one in, with blind-mate power and data connectors.  Insulation allows natural cooling inside the unit, so the printer can start the next job.

4. Unpack

Hands-off powder recovery with Fuse Sift X1: Integrated compressed air, sealed glovebox, and parts hatch keep breakout clean and fast. Capacity for 3 to 5 full builds of used powder, with automatic powder transport to the Mix Kit.

5. Finish

Clean and Polish with Fuse Blast: New 400 mm Fuse Blast Large Tumbler Basket fits 2-3× Fuse build volumes and 50% more parts per cycle.  Optional Polishing System upgrade delivers smooth, semi-gloss, dye-ready surfaces.

Tech Specs

Technology

Selective laser sintering (SLS)

Build Volume

330 × 330 × 565 mm | 13.0 × 13.0 × 22.2 in (61.5 L)

Layer thickness

110 microns | 0.004 in

Laser Type

Ytterbium Fiber, 120 W

Laser Spot Size

330 microns | 0.012 in

Throughput

0.330 sintered kg/hr

Max Packing Density

30%+ (volume), 48%+ (mass)

Material Refresh Rate

As low as 20%

Materials

Nylon 12, Nylon 11*, Nylon 12 GF**, TPU**, Open Material Mode

Print Intelligence

AI-powered real-time print failure prevention

Footprint

1.3 m^2 / 14.1 ft^2

Power Requirements

200-240VAC single phase, 50/60Hz, 50A rating 

Warranty and Services

Production and Self-Service plans available.


Starting at € 72.499
BUILD BIG: 330 x 330 x 565mm build volume, with 30%+ packing density
LOW PART COST: Production-quality part for 50% less, all in half the space
PRODUCTIVITY: Same day large parts and 3x the throughput of competitors
RELIABLE: AI Powered Print Intelligence failure prevention
INTUITIVE: Install & operate in one hour, start a print in 5 minutes 
Book a demo
Contact Sales

Hardware Overview: Production at the Press of a Button

  • Build Big: Produce full-scale production-quality parts in a massive build volume or run production builds at over 30% packing density to manufacture thousands of end-use parts in days, not weeks.
    • 330 × 330 × 565 mm build volume.
  • Low Part Cost: Fuse X1 delivers up to 50% lower part cost than legacy powder bed fusion systems in less than half the floorspace. Fuse X1 is cost-competitive with injection molding for tens of thousands of parts.
  • Productive: With 30%+ packing density and a 61.5L build volume, the Fuse X1 fits more parts in a single build than competing industrial SLS and MJF systems, adding up to thousands more parts per week.  
    • 3x throughput vs. Industrial Competitors
  • Intuitive and Reliable: Fuse X1 fits through a standard door, doesn’t require facility retrofit, and installs and prints on day one. An intuitive touchscreen guides you, while the build unit enables 5-minute changeovers.

Technology

  • Adaptive Thermal Control enables unlimited packing freedom, and exceptional part quality by delivering, maintaining, and sintering powder at an incredibly stable temperature.
  • Print Intelligence uses AI-powered computer vision to isolate and prevent failures, maximizing uptime so you get great parts on time every time.


Workflow: Large Format SLS, Simplified

An end-to-end industrial workflow you can install and run in one hour. No dedicated operator required.

1. Prepare

Auto-pack, optimize, and organize in PreForm: Orient, hollow, or label models, estimate print times, and automatically pack parts for optimized density, reducing print time and limiting waste.  Import STL, OBJ, 3MF, or models directly from a wide range of CAD applications.

2. Print

Print large parts in hours, not days: Most large builds complete under 24 hours, with same-day large parts in 5 hours.  Print Intelligence detects and masks anomalies in real time to protect yield.

3. Swap

5-minute print changeovers with the Fuse X1 Build Unit:Roll one build unit out, roll the next one in, with blind-mate power and data connectors.  Insulation allows natural cooling inside the unit, so the printer can start the next job.

4. Unpack

Hands-off powder recovery with Fuse Sift X1: Integrated compressed air, sealed glovebox, and parts hatch keep breakout clean and fast. Capacity for 3 to 5 full builds of used powder, with automatic powder transport to the Mix Kit.

5. Finish

Clean and Polish with Fuse Blast: New 400 mm Fuse Blast Large Tumbler Basket fits 2-3× Fuse build volumes and 50% more parts per cycle.  Optional Polishing System upgrade delivers smooth, semi-gloss, dye-ready surfaces.

Tech Specs

Technology

Selective laser sintering (SLS)

Build Volume

330 × 330 × 565 mm | 13.0 × 13.0 × 22.2 in (61.5 L)

Layer thickness

110 microns | 0.004 in

Laser Type

Ytterbium Fiber, 120 W

Laser Spot Size

330 microns | 0.012 in

Throughput

0.330 sintered kg/hr

Max Packing Density

30%+ (volume), 48%+ (mass)

Material Refresh Rate

As low as 20%

Materials

Nylon 12, Nylon 11*, Nylon 12 GF**, TPU**, Open Material Mode

Print Intelligence

AI-powered real-time print failure prevention

Footprint

1.3 m^2 / 14.1 ft^2

Power Requirements

200-240VAC single phase, 50/60Hz, 50A rating 

Warranty and Services

Production and Self-Service plans available.